|
 USE THE HANDHELD ON PRIMARIES WITHOUT STICKS
The Origo PhaseID System eliminated the need to "walk the line". Now, through Origo Corporation technical innovation, it is no longer necessary to use hot sticks on primaries or extendo sticks on overhead. The PhaseID Handheld (patent pending) can be used on most primary and all secondary circuits.
On overhead three-phase circuits, simply stand near or under the conductors and take a single phase measurement. The Origo software sorts out the three phases and displays them as follows: Near, Center, Far = ABC, ACB, BAC, BCA, CAB, or CBA.
|
69KV Overhead
|
12.5KV Overhead
|
|
|
|
| |
|
69KV Buss
|
12.5KV Buss
|
|
|
|
12.5KV Bushing
12.5KV Test Point
12.5KV Single Phase Overhead (Vehicle exit not required)
12.5KV Overhead (PhaseID + Netbook + Aircard = low cost instant phase identification)
69KV Overhead (Convert a 20 minute extendo stick phasing task on high overhead lines into a 20 second task using the handheld)
U.S. Patents 6,667,610 & 7,031,859. PhaseID Datalogger & PhaseID Handheld Patents Pending.
|
Welcome